Diy Lily of The Valley Light

It's tiny, charming, and has a delightful earthy scent. It evokes joy and purity. Every year on May 1st, people in Europe offer this flower to express their blessings and to wish each other peace and happiness for the upcoming year. It transforms into a lamp and a blessing. May this Lily of The Valley Light be the best gift you've ever received for yourself and your loved ones.

Specs:

• DIY material kit
• Glass cover specification: 9x12cm
• Base diameter: about 12CM

Production steps:

Step 1: Twist the filament out of the approximate shape and height of the mushroom. (Probably made 6-7 different mushrooms, the remaining filaments can be spread on the bottom)

Note: The distance between USB filament lamps is 5cm. The manufacturing process is the same as that of the battery, except that there will be lights on the USB-style mushroom pole, which does not affect the manufacturing. The height of the mushrooms can be set according to your preference.

Step 2: Arrange the distance and height of the mushrooms, and fix the bottom of the filament with hot melt glue.

Step 3: Cover the bottom with clay, the high point of the clay in the middle makes people feel like a mound, making a curved lawn. And knead it into similar-sized stems.

Note: 1. The clay needs to be encapsulated.

Note: 2. The stems can be made into thick and thin mushroom stems according to your preference. Mushroom stems need to be rubbed evenly by hand. In the process of making mushroom stems, there should be no traces of broken wires, otherwise the mushroom stems will crack when the clay dries.

Step 4: Use clay to assist paving tools to make bacteria caps, and fix the rods and caps with latex.

Step 5: Apply a layer of brown paint on the bottom and let it dry after painting.

Step 6: When the paint is dry, apply latex evenly.

Step 7: Sprinkle grass powder

Step 8: Leave it for a day or two, wait until the clay is completely dry, cover with a glass cover, and finish

Reminder: A little excess grass may fall off during the transportation of the finished mushroom lamp. We will give a small brush to each finished product. You only need to use the small brush to clean the excess grass.

If you don't understand something during the manufacturing process, you can contact us. We will answer you as soon as possible.

Looking forward to your production and sharing with us.